All Messages

bikinidan Put channel 5 onto a 3-position switch (-100, 0, +100) - that will give you manual at "0".

2020-09-09 07:24:59 Helpful (1)
Submit
Answers (3)

NYHobbyist Try making sure that you never touch DATA FORMAT in the menus EVER, if you do touch DATA FORMAT, it will make you do the calibration everytime you Power the system back on

2021-03-07 04:02:50 Helpful (0)
Submit
Answers (1)

BG544816189 I guess what you are trying to say is, that you can't bind copter and controller. My best guess is, that either the controller and copter have different versions of firmware (FCC VS. LBT) or another compatibility issue with the firmware (outdated on tinyhawk or controller). Try to update both controller and receiver.

2020-09-29 08:15:40 Helpful (0)
Submit
Answers (2)

Q: how many do you get in a pack?

Asked by pat1 on 2018-02-09 01:22:15

BG544816189 4 per pack.

2020-09-21 01:13:01 Helpful (0)
Submit
Answers (1)

Q: combien d'ampere consomme le moteur en 2s?

Asked by Utac76 on 2020-07-04 02:03:49

BG544816189 I fly it with 4s and it does fine.

2020-09-21 01:12:30 Helpful (0)
Submit
Answers (1)

Q: can I bind the r xrs reciver whit jumper t8sg ?

Asked by BG481422242 on 2020-09-16 04:43:37

BG544816189 If the t8sg supports either ACCST or ACCESS protocol then yes

2020-09-21 01:11:03 Helpful (0)
Submit
Answers (1)

Q: Should i laminate this little plane? If so how thick the film should be?

Asked by muniramuminovic on 2020-09-21 01:03:50

BG544816189 There is really no necessity for that. Also that would be counter productive to the purpose of being under 250gr. It flues well without that and can take a bit of beeting too.

2020-09-21 01:09:15 Helpful (1)
Submit
Answers (3)

Q: where is the center of gravity?

Asked by Roger on 2020-08-06 02:51:51

BG544816189 The CG is marked on the bottom of the wing AFAIK

2020-08-06 03:00:56 Helpful (1)
Submit
Answers (2)

Q: Does it come with ZOHD Kopilot?

Asked by BG231341021 on 2020-07-24 12:09:11

BG544816189 No, only in fpv version

2020-07-24 12:21:23 Helpful (0)
Submit
Answers (3)