All Messages

BG111254537 Yes, this is a bank and yank setup. For the elevators you will need to use two channels on your receiver. Each elevator servo should be in its own channel. Once done you will have to go into your transmitter and setup one of your elevator servos to be slaved to the other channel. That way both will move at the same time. You might have to reverse one or both servos in you transmitter as well to make sure they are moving in the correct direction. The ailerons can just use a “Y” harness and plugged into your channel 4 slot. If you want Flaperons for slower landing speed you will have to setup your ailerons like the elevators.

2022-12-10 07:11:26 Helpful (1)
Submit
Answers (3)

Q: Does it have metal gear servos?

Asked by DICKFRANKLINhsv on 2021-08-06 12:42:48

BG813155416 No but the servos are cheep and break easily. I've broken several while learning to fly. I keep extras on hand. But I haven't broken any in quite a while. Just don't crash and you'll be fine.

2021-08-11 01:44:02 Helpful (0)
Submit
Answers (2)

Q: What better? this product or xk x520

Asked by yanivoz on 2019-12-24 11:50:25

DICKFRANKLINhsv It is the same plane as the JJRC M020, also with plastic gear servos for motor tilt. As noted in other answers, these servos are very likely to strip gears. Mine did that on the first transition from drone to airplane mode. Be prepared to spent another $30+ for 5g metal gear servos, and servos are not easy to replace

2021-07-15 12:27:49 Helpful (1)
Submit
Answers (6)

Q: did it goes straight

Asked by manuuppal on 2019-06-15 08:06:27

DICKFRANKLINhsv No, it will fly according to wind effects and probably the configuration of wings, rudder, etc. It won't go far

2021-06-19 04:24:16 Helpful (0)
Submit
Answers (1)

DICKFRANKLINhsv This "kit" is not for the novice modeler. You need to understand how RC models with electric motors and servos work.

2021-05-31 08:42:10 Helpful (0)
Submit
Answers (1)

Q: esse modelo, vem com o controle???

Asked by BG710414216 on 2020-12-14 06:57:36

DICKFRANKLINhsv No. You need a (really) micro receiver and compatible transmitter.

2021-05-31 08:40:21 Helpful (0)
Submit
Answers (1)

Q: Where can we buy the Eachine Safe-Flight Control with GPS

Asked by DICKFRANKLINhsv on 2021-02-20 09:18:53

Plumwas it will soon be available

2021-03-09 03:01:00 Helpful (0)
Submit
Answers (1)

Karel Lootens yes, 9g * 4 for flaps and ailerons, 25g * 2 for rudder and elevator

2021-03-01 01:27:20 Helpful (0)
Submit
Answers (1)

DICKFRANKLINhsv ari33 is wrong: The description DOES NOT say that ESC is NOT included, nor what the ESC spec (amps) should be.

2020-11-16 02:15:16 Helpful (1)
Submit
Answers (2)