sfromis
sfromis Youmay need a high drain battery for the max possible brightness, and 3C is not that high.
Q: Can i use this for my mitsubishi montero 2014 model?
Asked by rodolfoduruin3 on 2019-08-24 07:31:15
sfromis Very unlikely, that would be atrocious security.
2020-01-24 06:43:48 Helpful (0)Q: Are these pass through plugs or butt stop at end of plug??
Asked by jammy5152 on 2020-01-06 06:18:56
sfromis No pass through.
2020-01-16 03:29:03 Helpful (0)
sfromis You should not expect it to work, as the specifications says 220-240V. Anyway, I would not expect the lower voltage to be found in outlets with around 230V, which the prongs match. 110V outlets are physically different.
2019-12-14 01:53:07 Helpful (0)Q: Is it possible to modify the I2C adress
Asked by payettep on 2018-08-28 01:34:03
sfromis Using the solder jumpers near the same edge as the INT pin, you should be able to choose between I2C addresses 0x29, 0x39, or 0x49 by bridging the center pad to either L or H.
2019-06-13 11:15:21 Helpful (0)Q: how to assemble all parts into a single i.e into operation...
Asked by Abhishek Kangokar on 2018-02-11 04:52:09
sfromis You'll have to buy a battery separately, and solder wires from the circuit board to both solar panel, battery and LED module, all with the appropriate polarity.
2019-03-12 12:41:50 Helpful (0)
sfromis Full charging capacity needs more than the power level provided by many USB ports, often somewhere from 500-1500 mA, if at all. I'd expect it to still charge at lower speed, but charging 4 batteries from 500 mA can be really, really slow.
2018-10-24 09:27:16 Helpful (1)We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
.jpg)
sfromis My experience is that the battery pack can be swapped, if you fold the bike and turn the key under the battery an extra step while pushing it.
2022-01-24 11:20:53 Helpful (0)