SteveSi
SteveSi Are you connecting it to a VA meter? If so you may have connected the 0v thin black wire which is incorrect. Adjust current by only connecting battery powered DVM. If using a VA meter, do not connect the thin black wire. Pots are multi-turn - you must keep adjusting until you hear it click.
2019-11-25 05:53:00 Helpful (0)
SteveSi Checkwiring in plug. Blue and White wires may be swapped round. http://rmprepusb.blogspot.com/2019/11/my-fantastic-ksger-soldering-iron.html
SteveSi blueand white wire swapped! http://rmprepusb.blogspot.com/2019/11/my-fantastic-ksger-soldering-iron.html
Wisent Voltage measurement range: DC00.0-99.9V . check the wiring please
2019-11-11 01:01:10 Helpful (0)
SteveSi It means the white and blue wires in the plug have been swapped over! 1=Blue, 2=White, 3=Green, 4=Black, 5=Red - THIS IS CORRECT WIRING. I have same issue and swapping over white and blue fixed it!
2019-11-05 04:37:03 Helpful (2)We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
Aliay Yes, the Supply Voltage is DC 7-12V.
2020-01-02 08:30:32 Helpful (1)