rromano001
Q: Can it measure dc current with clamps? How low amps?
Asked by BG565338491 on 2021-10-15 09:53:21
rromano001 Low range has a full scale of 2A, instrument has 4 digit so it can display 1mA increment on both AC or DC measurement. AC is stable and measure current both AC (average value) or also average DC without sign detection. About precision and stability I report at almost is impossible to appreciate 1mA, zeroing instrument it has 2 3 mA dead band on short term. Measuring a small intensity like 10-20mA instrument is also non linear. Applied a measured DC current of 12mA DC: - on AC scale it measure 12mA stable regardless of current direction. - DC scale require zeroing instrument without current on clamp, just after zero display an offset of -2mA - immediate measure show values from 7 to 20 mA - reversing instrument the values are -10 -12 then continue changing. - In a few minutes offset raise from -2 to -12mA. IMHO on DC current not less than 50 mA can be measured without continous recalibration, may be you are more lucky and get a less noisy and lower drift one. Instrument is cheap and cannot ask them precision of expensive probes, I am very satisfied about performance
2021-10-16 05:25:35 Helpful (1)
rromano001 Helloon September 2020 I left a request with same data your friend reported. not only theoretical max output but convertion rate prove is less than 21% as I argued for. 21% panel are double layer special. I suppose this is a stock low end performing less than 10% conversion of incident power.
Sykoma ihave one its about 20 watts max.
2021-08-24 04:07:20 Helpful (0)Q: include laser ? how much power
Asked by BG451516408 on 2021-07-31 03:14:42
rromano001 No laser included in this list. Controller has a port, motor support can hold it, so you can buy one.
2021-08-03 01:39:11 Helpful (0)
rromano001 Aganlike the one I bough, they declare unreal IP grade. I don't see gasket nor protective shield so suspect this is no more than 41 42 and cannot be used outdoor. https://www.google.com/imgres?imgurl=https://atslab.com/wp-content/uploads/2018/09/ingress-protection-diagram-1.jpg
The seller Is real IP66
2021-07-05 09:45:24 Helpful (1)Q: why isn't there an option for a 1080p drone in my phone?
Asked by BG495124454 on 2021-06-21 01:52:54
rromano001 Which model you bougth? Is your phone Full HD capable? App in general is poor but it display image at resolution of smartphone... when it work.
2021-06-23 07:23:43 Helpful (0)Q: why after some time for example 15 mins go offline by itself??
Asked by Leon94 on 2021-05-27 03:54:52
rromano001 No idea, I was unable to use. Put on recycle bin to do something in future or move to trash.
2021-05-27 11:49:55 Helpful (0)Q: hi just i contact usb for cnc writing cntr + x in the console what i do ?? thank you my friend
Asked by mqamber on 2021-04-17 10:18:12
rromano001 Sorry al my best to try understand is not enough to decode ... Is
2021-04-19 06:24:44 Helpful (0)
rromano001 Hello,I seen you pointed to AC only current. On text no DC current measurement is reported but at Base of Yaw on current appear the symbol of AC DC. I think one case is produced for cheap and DC. As you said good for price. Thank
Q: Hello, where can I get a user manual in Bulgarian?
Asked by ioan75 on 2021-03-20 12:30:23
rromano001 It's almost impossible IMHO, you had to translate himself from English still has taste of original Chinese languages.
2021-03-23 05:03:28 Helpful (0)
rromano001 No idea what can happen at your side. Please post log and or screenshot of error messages. Regards
2021-02-23 09:26:00 Helpful (0)Q: what is the max input voltage for the fan board
Asked by jasonram1984 on 2021-02-13 12:59:06
rromano001 Hi, it is not specified but based on the one I received I see XL7005A as regulator, this is specified as step down regulator up to 80V with 85V absolute maximum rating. Capacitor is rated 100V 105°C, diodes are ss110 so 80V can be reasonable but IMHO 70V or less is more safe margin. Using a SEPIC module I decided for 24V input so not exercised @ top range.
2021-02-15 05:50:52 Helpful (0)We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
BG164118354 IT IS A *MISPRINT* ( aka "Typo" ) ! IT SHOULD SAY : "3000 dB" - a child could understand that...🙃 😉 PLEASE ! OBSERVE SMILEY !
2022-08-07 10:08:46 Helpful (1)