FroehlichSchlapp
My Contents
All Messages
Reviews
Comments
Answers
Questions

All Messages

FroehlichSchlapp 06/12/2023
drone arrived in good package, easy access to USB port for betaflight config, although config was ok right out of the box. I bought the FrSky version but I did not manage to bind the receiver that was installed. I assume it is ACCCESS mode where I use ACCST. A small sticker or note in the box would have been nice. There was no docu/manual/whatsoever in the box. If this is your first copter that might be difficult. If you have only small experience, quite easy to set up. It flys very well. great power, stable handling, good video picture even at low video TX power setting. I don´t think that the TPU parts at the end / below of the arms will do much good in a hard crash, but they will definitely help in a not-so-smooth landing. if this is your first FPV drone: go for a smaller / slower one as the Nazgul will be in an obstacle faster than you can blink. if you have some experience and look for a RtF drone: this is it
iFlight Nazgul5 V3 Analog 240mm 5 Inch 6S Freestyle FPV Racing Drone BNF/PNP RaceCam R1 Cam BLITZ F7 E45S 45A ESC 2207 1800KV Motor
₹23,983.50 ₹26,895.89
0
Recommendations
Comments (1)
FroehlichSchlapp 06/12/2023
Nice feel to the props, sturdy but still with enough flexibility. The 4 I put on my copter were only very marginally out of balance. Very much recommended over cheap, brittle alternatives. Flying them: nice sound and great performance. Crash Resistance: unknown so far (and hopefully not anytime soon :-) )
6 Pairs iFlight Nazgul F5 5.1Inch 3-blade 5mm Hole CW CCW Propeller for RC Racing FPV Drone
₹855.73
0
Recommendations
Comments (0)

FroehlichSchlapp did the first 20 prints already, all large contact area. Good adhesion during printing, but part can be removed with a little help from a broken propeller. No damage to the pad, only margin traces of the parts

FroehlichSchlapp 07/10/2020
feeling good to touch, not tested yet
Creality 3D® 235*235mm Frosted Heated Bed Hot Bed Platform Sticker For Ender-3 3D Printer
₹500.25 ₹941.39
0
Comments (2)
FroehlichSchlapp 15/03/2023
Fast delivery for shipment from China to EU. Good package in outer cardboard box and drone + spare props + tools in plastic storage box. Battery tray 3d printed from elastic material - solid fit for my battery which will even allow for some swelling of the bat. Set-up was VERY easy with the screenshots for BetaFlight in the manual, despite that fact that this is my first drone that I set up myself. Flying indoor is good, crips controls, but not overly nervous with settings from manual. Only thing I have not figured out yet: when landing it hops around like a mad frog - even at throttle = 0 - until I switch off the props. A hint on this will be welcomed. Can´t wait for the rains and storm to pass this weekend to go flying in the park
Happymodel Bassline 2S 90mm 2 Inch Micro Toothpick FPV Racing Drone BNF with CADDX ANT 1200TVL Camera
₹10,792.11 ₹11,991.32
0
Recommendations
Comments (1)
FroehlichSchlapp 15/03/2023
Delivery was fast, package ok. works well even with my hot snot glue which needs more temperature than the standard glue sticks fast heating up good control of glue amount due to small nozzle and ok feeding mechanism.
3.6V Cordless DIY Hot Glue Guns 1800mAh Li-ion Glue Hand Craft Power Tool W/ 10/40/100pcs Glue Sticks
₹1,541.00 ₹1,712.31
0
Recommendations
Comments (0)
FroehlichSchlapp 06/03/2023
Easy assembly, works good out of the box. nozzle and bed heat up very fast Temperature of bed has to be adjused to material used, recommendation by filament manufacuter or in Cura are good starting point I printed PLA, PET-G and TPU so far with good results, print speed of 60 mm also giving good results Filament holder not fixed / on top of gantry would improve stability of construction (less vibration), but for the max. 15 cm high models I printed so far it was ok
Artillery® Sidewinder X2 & Sidewinder X1 3D Printer Kit with 300*300*400mm Large Print Size Support Resume Printing&Filament Runout Detection With Dual Z axis/TFT Touch Screen
₹35,886.60 ₹60,816.63
0
Recommendations
Comments (0)
FroehlichSchlapp 06/03/2023
Fast delivery, male and female connector fitting good and not too tight together. Good system which makes wrong polarity connection impossible
10 Pairs XT30 2mm Golden Male Female Plug Interface Connector
₹1,027.04 ₹1,284.02
0
Recommendations
Comments (0)
FroehlichSchlapp 06/03/2023
filament is printing very good with parameters by provided by Ender, no stringing solid connection between layers clear colour (white)
Creality 3D® Ender Brand 1.75mm 1KG/Roll PLA Filament for 3D Printer
₹3,082.85 ₹3,853.77
0
Recommendations
Comments (0)
FroehlichSchlapp 06/03/2023
bright yellow colour makes for good visibility good quality from visual inspection, solid fit on 1,5mm motor shaft
4 Pairs Gemfan Hurricane 2023 2x2.3 2 Inch 3-Blade Propeller 3 Holes for 1105-1108 Motor RC Drone FPV Racing
₹598.75 ₹855.73
0
Recommendations
Comments (0)
FroehlichSchlapp 06/03/2023
using one on my googles, better reception of video compared to linear antena I used before. 2nd one will go into FPV airplane
Eachine K-Loverleaves 5.8G 5dBi 6 Leaf Clover Antenna RHCP SMA/RP-SMA 1 Pair For FPV VTX RX RC Drone
₹1,027.04 ₹2,363.32
0
Recommendations
Comments (0)
FroehlichSchlapp 18/03/2021
working perfect in my DLG with a 2s LiPo where there is not much space compared to other BECs the price is unbeatable
10 PCS 7V-28V to 5V 3A Mini BEC Module Voltage Regulator For Gimbal Flight Controller
₹1,276.31 ₹1,849.37
0
Recommendations
Comments (0)
FroehlichSchlapp 07/10/2020
feeling good to touch, not tested yet
Creality 3D® 235*235mm Frosted Heated Bed Hot Bed Platform Sticker For Ender-3 3D Printer
₹500.25 ₹941.39
0
Recommendations
Comments (2)
FroehlichSchlapp 07/10/2020
nicce and brihght color, tightly sealed in foil at shipping, printing good with no broken filament so far and good results at 200°C nozzle temp.
1KG 1.75mm PLA Filament 3D Printing Material For Reprap Prusa i3/Creality 3D Ender-3/Artillery 3D Printer Part
₹2,990.34 ₹4,110.75
0
Recommendations
Comments (0)
FroehlichSchlapp 07/10/2020
really helpfull in cleaning 3D printer noozle
TWO TREES® 10Pcs 0.4mm Stainless Steel Nozzle Cleaning Needle Drill Bit for Reprap 3D Printer
₹326.36 ₹855.73
0
Recommendations
Comments (0)
FroehlichSchlapp 07/10/2020
no snapping bands after the first 5 flights,
10 PCS Rubber Band Elastic Cord 10mm*120mm/10mm*150mm Universal for DIY Model RC Airplane Wings Motors
₹598.75 ₹718.67
0
Recommendations
Comments (0)
FroehlichSchlapp 07/10/2020
secure packaging from FrSky, quite easy to program after figuring out how, working great on my 1,8m STOL plane: used only as normal Rx and in stabilizer mode for more peace of mind when wind is gusty during landing (no experience on knife or hover function as I do this manually :-) ) Range is good up to visibiliy limit (1,8 m plane !)
FrSky S6R 2.4G 6CH ACCST Receiver With 3-Axis Stabilization And Smart Port Telemetry for RC Airplane
₹4,282.06 ₹5,481.28
0
Recommendations
Comments (0)

You are the expert,can you help?

We sincerely invite you to subscribe to the Invite Answer email!

If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.

Help others and be happier!

  • Subscribe

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.Specific people will also have their own exclusive badge.
CEO Badge

The CEO Badge is owned only by the boss of Banggood.

Badges you can earn are coming soon
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe