dchang18
- My Contents
- All Messages
- Reviews
- Comments
- Answers
- Questions
Answers
Q: Is light bleeding between the acrylic sheets or in real life its's not that horrible?
Asked by nix78 on 2021-10-24 14:29:54
dchang18 The "25" that is in the video alone is the temperature in Celsius.The "4" that is in the video after the date 10/01 is the day of the week (4 = Thursday).
Helpful (0)
dchang18 I had a similar problem (but it was happening right after assembly). What it took to fix mine was to re-solder the capacitors, not the resistors. First, I re-soldered the resistors, but that did nothing, so I resoldered the capacitors, and that was the fix. I didn't have to remove the capacitors to do this, I just re-melted the solder and allowed it to burn off any flux. It was probably just one capacitor, but I redid all of them because it was easiest to do that.
Helpful (0)
dchang18 The light doesn't bleed badly between the digits. If you are referring to the LEDs in the base lit up as shown in the photo, those are not from the digits. Those LEDs illuminate the base only and can be turned off or can be set to various colorful patterns.
Helpful (0)