AStasauskasWrote 3090 days ago.I was delighted to unpack it, packed similar to PZ0420M SKU287007 , nice packaging.
Tried with 2S 7.4V Lipo battery with 34 channel (5645M) where it should be strongest and
it worked (find my pictures how to connect directly). Have not tried long range, but it heats
ALOT. Be careful, you can burn yourself, 0.6W is quite a lot. Also, not sure what would work best,
but I will be connecting this to 12V UBEC and probably connecting UBEC to camera directly in hoping
for TS832 to generate less heat, so will connect only S yellow wire from camera to TS832.
By Ed06/07/2015I got a Boscam TS832 for $50, this is the same thing made on the same factory line (I bet). Plug a camera and a battery and it works. I have two of the Boscam and when I saw this I ordered more even though I have more RXs than I need. I am setting up a permanent test bed to evaluate cameras and OSDs and will use this RX for that purpose. Great price! Highly recommend!!!! Thanks Banggood!!!
By stoep18/09/2016I was pleased to see between 400 and 650mW from this little unit. Depends a bit on the selected frequency
The Modulator part is the RTC6705 (see picture), which is controlled by SPI by an on board micro also taking care of the LED band/channel stuff.
The final stage is the RTC6659. Originally designed for QAM64 digital modulation at a level of +23dBm IE 200mW. In FM mode the output power can be increased indeed and around 600mW is possible.
Cooling is via heat transferring gap-pad to the housing