Customer Reviews

4.94 out of 5
See all 217 reviews
Write a Review
  • All Reviews (217)
  • Image (40)
  • Video (0)
  • All Star
    • All Star(217)
    • 5 Star(204)
    • 4 Star(12)
    • 3 Star(1)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (India)
|
Show Original

A part of the review has been auto-translated.

  • 22/01/2022

    Cheapest and most powerful motor in price. It's body and wires are very thin but doesn't gets heat up at full throttle. Must buy product.

    Comments (1)
    Show Original
  • 01/08/2022

    thanks you God bless you

    Comments
    Show Original
  • 28/09/2021

    The motors are working well. Good quality.

    Comments
    Show Original
  • 02/08/2022

    very poorly packed just put on a mail bag no packing very disappointing

    Comments
    Show Original
  • 14/12/2021

    liked only didn't realize that there was no posture

    Comments
    Show Original
  • 28/08/2021

    Works great as a puller haven't tried pusher setup.

    Comments
    Show Original
  • 20/06/2019

    The quality is perfect. CNC machined. Rotates in his axis without wobbling. The cable is long so you can connect them directly to this kind of new 4 in 1 ESCs stacks. KV are real 2280KV. The shaft diameter is M5 and the weight in a precision scale is 20g. Used with 3s 1500mah battery and works like a charm. Also tested with 5058 propellers. If you also need some cosmetic design this is the perfect one because of the CNC machining terminations. They are great. Recommeded 100%

    Comments (1)
    Show Original
  • 03/03/2019

    This is the second motor that I bought. I have tested it and it works well. Thrust on 2s (full battery) with a 5x4 prop is just over 200 grams (as in the specs.). Flight time (mostly full throttle) on 850 mAh, 2s with the 5x4 prop is close to 15 minutes and when I am just floating around, flight times are 25 minutes.This means that at full speed the motor draws just under 4A. The esc I use is 12A, but I think that 6A (constant) would suffice with this set-up.

    Comments
    Show Original
  • 26/08/2018

    I bought this motor together with the SimonK 10A ESC and Kinkong/LDARC 5040 propellers. The motor is very well made, the leads are silcone and will not break off when moved. The motor runs well and does not get warm with this set-up. However, thrust is (in my case) more likely around 150g (battery = Zippy Compact 850 mAh 2s - was not full), as the model (184g) is not supported by the thrust of the motor.

    Comments (3)
    Show Original
  • 25/08/2018

    I came from PM1806 "plastic motor" and the DXW D1806 are for sure more powerful on the same setup (3S 1600me / 10A ESC / 5030 prop) But they're getting crazy hot, after 2-3 minutes the prop screw became too hot for my fingers! And the motor smells like wires are melting... I don't know if my motors are defective, but all 4 of them ?

    Comments (1)
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • ₹209.31
    • ₹3,887.23
    • ₹900.28
    • ₹1,049.79
    • ₹990.80
    • ₹2,342.84
    • ₹946.35
    • ₹4,605.68
    • ₹6,706.88
    • ₹1,292.24
    • ₹1,130.61
    • ₹1,130.61
    • ₹2,181.21
    • ₹1,211.42
    • ₹1,130.61
    • ₹1,002.92
    • ₹6,060.36
    • ₹4,524.86