Parfait pour confectionner des extrudeurs maisons.

Parfait pour confectionner des extrudeurs maisons.

Parfait pour confectionner des extrudeurs maisons.

L'objet a été reçu rapidement, en très bonne état installé facilement et marche à la perfection et prix vraiment pas chère.

L'objet a été reçu rapidement, en très bonne état installé facilement et marche à la perfection et prix vraiment pas chère.

L'objet a été reçu rapidement, en très bonne état installé facilement et marche à la perfection et prix vraiment pas chère.

Oggetto come da descrizione, arrivato nei tempi stabiliti dalla spedizione che dire, servizio sempre molto buono e materiale sempre al top! oggetto di buona fattura molto robusto insomma come la descrizione del prodotto!! faro’ sicuramente altri ordini , come sempre grazie bangood per la rapidità’ e la qualità’ dei materiali! peccato non averlo in italia un negozio del genere!!!!!mi trovo molto bene con il vostro sito e sicuramente farò altri ordini di altro materiale!

Oggetto come da descrizione, arrivato nei tempi stabiliti dalla spedizione che dire, servizio sempre molto buono e materiale sempre al top! oggetto di buona fattura molto robusto insomma come la descrizione del prodotto!! faro’ sicuramente altri ordini , come sempre grazie bangood per la rapidità’ e la qualità’ dei materiali! peccato non averlo in italia un negozio del genere!!!!!mi trovo molto bene con il vostro sito e sicuramente farò altri ordini di altro materiale!

Oggetto come da descrizione, arrivato nei tempi stabiliti dalla spedizione che dire, servizio sempre molto buono e materiale sempre al top! oggetto di buona fattura molto robusto insomma come la descrizione del prodotto!! faro’ sicuramente altri ordini , come sempre grazie bangood per la rapidità’ e la qualità’ dei materiali! peccato non averlo in italia un negozio del genere!!!!!mi trovo molto bene con il vostro sito e sicuramente farò altri ordini di altro materiale!

NICE

NICE

NICE

Great parts for my 3d Printer. Need to replace the nozzle throat and the heat block and this ones work just great !

Great parts for my 3d Printer. Need to replace the nozzle throat and the heat block and this ones work just great !

Great parts for my 3d Printer. Need to replace the nozzle throat and the heat block and this ones work just great !

Excellent set for 3D printer and in a very good price.

Excellent set for 3D printer and in a very good price.

Excellent set for 3D printer and in a very good price.

Very good unit. Bought two; one is now fitted and has 10 hours of printing with no leaks or jambs. It is a little different from the factory fitted unit on my Colido DIY printer. This unit can only fitted one way up. There is a recess on the top side of the heat pipe hole. The bottom side is flat. That mandates that the nozzle should be fitted on the flat side / bottom. The tapped hole for the temperature sensor is next to the hole for the heating element. This means that the sensor and heater fit from the same side and not opposite sides as does the Colido factory unit. A slight change of wiring routing was needed. Most importantly, there have been no jambs. Some heat pipes have burrs or a tight fitting Teflon liner tube - either of which may cause blockages after a few hours of printing. These units do not have those problems. Very happy to get consistent quality printing with this unit.

Very good unit. Bought two; one is now fitted and has 10 hours of printing with no leaks or jambs. It is a little different from the factory fitted unit on my Colido DIY printer. This unit can only fitted one way up. There is a recess on the top side of the heat pipe hole. The bottom side is flat. That mandates that the nozzle should be fitted on the flat side / bottom. The tapped hole for the temperature sensor is next to the hole for the heating element. This means that the sensor and heater fit from the same side and not opposite sides as does the Colido factory unit. A slight change of wiring routing was needed. Most importantly, there have been no jambs. Some heat pipes have burrs or a tight fitting Teflon liner tube - either of which may cause blockages after a few hours of printing. These units do not have those problems. Very happy to get consistent quality printing with this unit.

Very good unit. Bought two; one is now fitted and has 10 hours of printing with no leaks or jambs. It is a little different from the factory fitted unit on my Colido DIY printer. This unit can only fitted one way up. There is a recess on the top side of the heat pipe hole. The bottom side is flat. That mandates that the nozzle should be fitted on the flat side / bottom. The tapped hole for the temperature sensor is next to the hole for the heating element. This means that the sensor and heater fit from the same side and not opposite sides as does the Colido factory unit. A slight change of wiring routing was needed. Most importantly, there have been no jambs. Some heat pipes have burrs or a tight fitting Teflon liner tube - either of which may cause blockages after a few hours of printing. These units do not have those problems. Very happy to get consistent quality printing with this unit.

This is a nice and cheap set

This is a nice and cheap set

This is a nice and cheap set

weltbestes

weltbestes

weltbestes

Great product

Great product

Great product