All Messages

ARK 16/12/2019
Excellent Charger for beginners! It has all the functions as specified we can save upto 3 charge profiles for li-poly, li-ion, LiHV, NiMh and lead acid. can connect 1S to 6S lipo. It has storage function which you could manually set the storage vtg. Max power handling is 150watts and an output current limit of 10A. the input power has a limit of 7V to 28V and has a current limit of 12A. has Discharge function where you could either discharge internally, externally, or by recycling (dumping charge back to source if the source itself is a battery) The charger has an inbuilt fan for cooling..it starts working at 45degree and run at max power at set temperature which u could adjust in the settings. But i mainly bought this over ISDT is that it can measure or output PWM, PPM, Sbus signals..you have a 3pin for that on the left side of the charger. the M6 can also measure internal resistance and can balance cells for upto 6s batteries. On the output section we could choose the charger to work as a Power supply, where we could set the voltage from 1 to 28V and current to 0.5 to 10A... Although, the over current protection is slow to kick in. The system has an inbuilt fuse..if u short the output, you can change the smd fuse. (on the ISDT chargers they have poly fuses..means that the fuse will not be permanently damaged when a short occurs). It has a 5V 2.1A USB port. it can be used to charge your phone. or upgrade the M6 firmware (the latest firmware is 1.22). updating firmware is so easy..just plug in the USB cable which came with the charger download the latest firmware from toolkitRc's site, extract the zip files and just run the windows batch file.. And for some of you..u may need to calibrate the device.. for that press the exit button while you plug in the input supply. then you will be taken to a screen where you could change the values. plug in a battery of known voltage and check the vtg on the charger and adjust it accordingly. (refer my review pics)
0
Recommendations
Comments (0)