hansnl
hansnl@JJNL8 Muchfaster, now using 3S /1800mA lipo. Full trottle driven will balloon stock tires too much, agressieve acceleration will weelie the car and flip over. But great fun !
Q: They are just used for the front of 124016 ?
Asked by BG495160056 on 2022-12-29 12:03:14
hansnl For the rear axes also .. Tip: the chromed model are better rust resistant
2022-12-29 08:45:27 Helpful (0)
hansnl I do agree with you , check tubo racing 1:76 at aliexpress.com nowadays. bye, Hans
2022-12-20 08:50:07 Helpful (0)
hansnl I don't think this will work without adaptations of the inverter electronics.
2022-08-17 08:53:57 Helpful (0)Q: Can I externally control the frequency with a separate microcontroller?
Asked by TWYT on 2022-07-11 09:00:55
hansnl Yes you can, if your controller can output a analog voltage 0-10 volt or current 4-20mA VL1 External analog voltage input 0-5V 10V Analog voltage input CI External current signal input 4-20mA Current input
2022-07-11 05:53:00 Helpful (0)Q: how do i get the music to work
Asked by BG137552041 on 2021-10-22 06:20:59
hansnl You should order this : https://www.banggood.com/nl/Stark-Long-Arc-And-Bluetooth-Music-Dual-Mode-Music-Tesla-Coil-Palm-Flash-Bluetooth-Flash-Length-10CM-Science-Toys-p-1864091.html Bit more expensive , but does have bluetooth build-in . I'm able to cast square wave audio at my Tesla Coil .
2022-06-15 07:27:20 Helpful (0)Q: Would this work with 1:10 scale Wltoys 104001?
Asked by BG511616532 on 2022-05-03 09:40:47
hansnl Yes, i do think so. My wltoys 144001 did have the same brushed motor like your 104001 , and this brushless kit fits fine even the 144001 has a smaller chassis. regards, Hans
2022-05-03 08:32:59 Helpful (0)Q: Is this compatible with EV8000D goggles?
Asked by BG521844312 on 2022-04-20 02:06:45
hansnl Yes, it is . Aswell for all other FPV receivers working at 5.8Ghz range.
2022-04-20 08:48:26 Helpful (1)
Q: how do I set the parameters for a different transmitter if there is no 'set' button on the esc
Asked by EliotFox on 2022-04-06 04:13:19
hansnl The transmitter connects to the receiver with the BIND button in the receiver. The receiver (channel 2) is connected to the ESC . When you like to change ESC parameters, you have to order the available program card and connect this at your ESC . Hans
2022-04-06 09:39:36 Helpful (0)Q: does it come with reverse polarity protection ?
Asked by BG571654452 on 2022-03-23 09:51:41
hansnl Don't know but connect a diode anode at the red (+) wire and you reverse polarity protection. Succes !
2022-03-23 10:04:32 Helpful (0)Q: can I use this 2.2kw inverter in my 800mw spindle?
Asked by sotar1921 on 2022-02-07 01:13:53
hansnl Shure, the maximum load is 2200 Watt so a 800 Watt motor is no problem for this inverter. tip: when this motor is having a capacitor, you should remove this and connect each phase to the motor coils . also beware for overheating of your spindle motor at low speed heavy load. Regards, Hans
2022-02-07 03:52:47 Helpful (0)
Q: How many photos were store in the watch
Asked by BG198411526 on 2021-11-18 01:24:07
hansnl rephrase you question , don't understand your question. bye, Hans
2021-11-18 08:07:05 Helpful (0)
hansnl Hi, yes also mine has only full on and off , no other speed option build in. But for the price this is no bad deal. Bye, Hans
2021-11-10 05:20:23 Helpful (1)
Q: Is there a need for a program card for a full conversion?
Asked by BG343921854 on 2021-08-25 01:57:10
hansnl Not specialy , but i liked to play with some parameters with my rebuild 144001 . Received this card recently, but did not too much with it. Also looked at YT for some technical explanation for this card, but what i've found were not really experts in what they are talking about.. Goodluck with your conversion ! Bye, Hans
2021-08-25 02:12:48 Helpful (3)We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
