Frits
Q: How Much current does it use?
Asked by Frits on 2022-03-17 06:38:59Q: Is it made from poly- or mono made diamants?
Asked by Frits on 2020-09-05 05:04:18
E1337 Couldn't tell you... What's the difference?
2021-08-30 10:16:59 Helpful (0)
kwec7744 Pleasebear in mind, that this Table Saw is only designed for light work.
2021-02-13 09:15:45 Helpful (0)Q: I need 30pcs 30M3 and 30pcs 30M4. Do you have?
Asked by Fredy on 2020-08-06 02:49:07
Frits What is 30M3?
2020-08-06 03:43:00 Helpful (0)
Q: Sir i want to work a motor 3 minute with 1 hower intervals can I use this product
Asked by BG493254450 on 2020-07-28 06:58:48
Frits Go in minutes-mode. 1 hour is 60 minutes. and than recycle mode. Works here. For you 57 min + 3= 1 hour. If you mean every hour a running motor for 3 minutes.
2020-07-28 11:22:08 Helpful (0)Q: Can I set a timer that turns on daily for 1 min automatically?
Asked by BG215713348 on 2020-07-13 12:04:41
Frits You can not, while it is in minutes mode than and and 999 min is around 16.65 h. Unless you mean every 12 h, than it can. So not every 24 h for 1 min.
2020-07-28 11:13:11 Helpful (0)
Saponaceous The life time of battery is about 1-2 years.
2020-07-22 07:05:55 Helpful (0)
Frits Sorry do not exactly understand what you are asking me. What I have done is replacing a halogen 300 w floodlight with a LED 30 w in the former housing . But with a (computer-) fan. Works perfectly and for hours. For me more than perfect.
2020-07-14 02:45:10 Helpful (0)
Frits The P0 en P1 are on red display, the rest of the settings ( Like cycling 4 or 5) are on the green display..
2020-06-27 05:41:02 Helpful (0)
Frits A relais is only a switch, so for a 12 V motor you have to put an extra power supply in serie with the motor. Try it out with an LED. 5V in serie with ca 180 Ohm and 5 V battery, K0 (relais)---180 ohm---LED---batt.--K1 (relais) (if it does not light change + or- batt) . Succes. Better not use the powersupply from the timer, so you can go then till 230V, if needed. .
2020-06-27 05:30:43 Helpful (0)Q: I need 30 seconds on & 3 hours off. Is it possible?
Asked by tapankumarpyne on 2019-09-12 08:50:52
Frits If it is possible to set timer1 in sec and timer2 in hours, and the inventor says that that is possible. Then say also how. I got 9 settings and do not know how to set the other 9. Both timers stay the same. Please some info?
2020-06-27 04:27:10 Helpful (0)
Q: Can you solder it with 40/60 solder?
Asked by Frits on 2020-02-18 04:31:25
Encephaloid not sure.
2020-03-05 04:26:18 Helpful (0)
We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
