All Messages

Q: Weight pump only?

Asked by meanblackbike on 2020-05-25 08:44:22

Vitalized 0.3KG

2020-06-07 01:06:36 Helpful (1)
Submit
Answers (2)

meanblackbike Those are for metal and as the answers show even heat treated - quenched metal will be drilled wow :) For wood better by the cheapest bits there are specific for wood have a pointing center tip - useful when need precision. For concrete or any building materials like bricks use ONLY those for concrete - they have tungsten carbide tip that is very hard. You can also use that tungsten carbide drill to drill ceramics but there are drills for glass that are more efficient due to the sharp edge.

2019-12-06 10:01:27 Helpful (0)
Submit
Answers (2)

meanblackbike If you got M14 it doesn't fit grinder 115 and 125 mm (at least those in Europe) , because the size of the spindle is 16mm so I hope the 16mm M16 will fit. The thread of my 115 and 125 mm grinders is M14 but the start nut has to go over the spindle as well. So you need 16mm hole in it. The picture has 17mm on a locking surfaces, that is needed to make the start rotating by the grinder. So M14 is useless for M14 grinders because the flange of 16mm. Buy M16 - I'm waiting and will report back.

2019-11-06 02:08:26 Helpful (0)
Submit
Answers (3)

meanblackbike Whatkit/pulley you attached to drive this wheel? (So I can use it and drive it - hint it is a 3 bolts.)

jacoblempire 06/03/2019
1
Comments (4)

Q: Does it Work with Raspberry pi?

Asked by Atreya Bhat on 2018-08-08 09:37:39

meanblackbike I user it on Orange PI and basically it is the Linux kernel/drivers that has to have driver for it, however it is dead now after working for like a month it is not recognized by any Linux andf I don't use windows anymore - But even on PC it is not recognized as a USB device. Perhaps the electronics died. I was using similar camera but had other low part for resting on a desk and not a bracket , however it died too after 6-7 month on the Orange PI. There is a IYIGLE camera that seems to work so far 2 months or so but the white balance is missing and the resolution is also like on the others 320x240 perhaps there are better drivers for such cameras that can make it work with 12 megapixels but I got none.

2018-08-15 06:37:44 Helpful (0)
Submit
Answers (1)

meanblackbike There is no such think like front or rear brake - those brakes are very simmilar if not the same as Avid BB5 and to mount it you just use those black bolts that has no washers on the pictures. If you are going to use fork that has "Post Mount" mounting holes you have to remove the adapter and instead using those black bolts I mentioned above you use those with a lot of washers. Washers are so called tri-align adjusting system that helps a lot mounting the caliper aligned to the disc. For using bigger then 160mm rotors you have to use other adapters (that aluminium piece that has 4 bolts from 2 sides).

2018-07-11 08:25:30 Helpful (0)
Submit
Answers (1)