All Messages

tirrex 1. Connect the ACC (red) and B plus (yellow) wires of the unit together and connect this in the car to the ACC (12V positive after the ignition switch). Its maybe red or yellow wire in the car, you need to check this. So the power (12V positive) to the device will be after start the car. Please note that in this case, no user settings are saved.2. Don't know

2023-09-16 11:08:35 Helpful (0)
Submit
Answers (1)

Q: Hi this panel fit with VW Tiguan CAVA 2009?

Asked by pompiere2017 on 2023-07-14 01:45:58

tirrex Thisis a universal product. If the head unit in your car is 2DIN and the screen is 10-10.1", then it will fit without problems. If not, look for an adapter frame (fascia) for your car.

2023-09-16 11:01:57 Helpful (0)
Submit
Answers (1)

Q: how is compatible with Seat Altea 2008?

Asked by BG937940442 on 2023-07-13 02:04:05

tirrex Thisis a universal product. If the head unit in your car is 2DIN and the screen is 10-10.1", then it will fit without problems. If not, look for an adapter frame (fascia) for your car.

2023-09-16 11:01:46 Helpful (0)
Submit
Answers (1)

Q: support 1,0 kg? wire

Asked by sgourakis on 2023-02-13 12:47:28

tirrex Yes.The size of the reel is approx. 10cm in diameter and 5cm in height. Bigger reel will not fit in the welder. A full reel with 0.8 mm wire weighs 1 kg. Not a full reel included in the set, but a half ( -). But if desired, this welder can be modified for larger coils.

2023-02-14 01:14:48 Helpful (0)
Submit
Answers (1)

tirrex There was a similar problem. There was something similar to a mesh in the headphone output hole. It was clogged, maybe earwax. I took it out with a toothpick. It still works great.

2023-02-14 12:40:21 Helpful (1)
Submit
Answers (1)