luis_teixeira
Q: how much bar pressure should I pump into it?
Asked by Markhun05 on 2022-11-15 01:57:13
luis_teixeira Fill these at 3.2 - 3.4 bar (46 - 50 psi) and you should be fine.
2022-11-15 02:57:35 Helpful (1)Q: does the 7" fits Toyota Camry 2014?
Asked by BG195617425 on 2022-08-12 02:49:23
luis_teixeira Hi, this car stereo should fit on any double height slot that follows the DIN standard. Its dimensions are 178mm * 102mm*43mm, which is within the DIN dimensions x 2 (180 x 50 mm). And because its depth is only 43 mm, it leaves a lot of room behind for ventilation or cabling. For that car in particular you will probably need to replace the dashboard frame around the slot for aesthetic reasons, as it appears to have its own infotainment system featuring a DIN (x2) but with a custom layout of buttons in the front. If your infotainment system provides car functions, you may also want to take that into consideration, as it might be difficult to preserve these functions with the new car stereo.
2022-08-12 03:27:21 Helpful (0)
luis_teixeira It should be firm enough so that there is some resistance to folding. It will get loose again after some rides, so it needs to be tightened periodically. In my case I have added an extra self-locking nut and applied threadlock to the threads around the 2 nuts. If you have to fold the scooter frequently you will notice the noises appear sooner, as there will be some wear to the plastic joint that is sandwiched between the lever and the folding axis. The thickness of the plastic will decrease, causing more slack between the parts.
2022-08-03 05:30:53 Helpful (1)
luis_teixeira@FabioCoelho88 @FabioCoelho88 no meu caso não integrei com as funcionalidades do carro, pois estou a manter o infotainment original. Acrescentei por causa das funcionalidades da camara de marcha atrás, GPS, etc.
Q: hello ,whats is the real weight of the scooter? Only scooter.
Asked by strikertech on 2022-06-11 07:40:18
luis_teixeira It weights about 50 Kg, just the scooter itself. Battery pack contributes with about 10 Kg of the total weight. Battery deck and most other structural parts are made of relatively thick aluminium parts which are a significant contribution to the overall weight.
2022-06-11 07:55:41 Helpful (0)
luis_teixeira I normally fill my road tires to about 3.2 bar (slightly below 50 psi). I also check the pressure every 2 weeks or so. I think in any case (road or off-road) you should not let the pressure drop too much, because as these are tubeless tires, without enough pressure it won't form a sufficiently strong seal between the rim and the tire, causing air to escape.
2022-04-05 01:27:03 Helpful (2)
luis_teixeira Apparentlythe battery is made up of Lishen LS LR2170SA cells. It is provided by Dongguan Bangsheng Energy Technology Co., Ltd. This seems to be a custom pack not listed in their product catalogue.
2022-02-17 03:06:21 Helpful (4)
luis_teixeira @BG215418414did you have to bleed (purge) the brakes as well? Thanks
We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
