TDA7498E Double 160W Power Amplifier Dual Channel Stereo Audio Amplifier Module Support BTL Mode
A part of the review has been auto-translated.
Good quality.... Need a very good dc power supply and pre-amp....
Brilliant little powerful amplifier. Just be careful with The PSU The chip is designed to allow the power supply to be earthed in a different place to the phone inputs but the designers of the board have missed this point and connected the phono outer to the main Psu ground. This means that the voltage drop on the PSU negative feeds back to the input and can give noise or even instability and feedback howl. The easiest way round this is to ensure the 36volt PSU is not grounded at all. If you want to guarantee you wont get smoke if there is a fault you should ground the phono plug back to the ground terminal on the other side of the board with a 2.5mm cross section wire and earth the equipment at this wire as well. apart from this very easy to use and good quality sound Ted Slevin
Excellent product recommend seller
Very good sounding amp for the money. Be very careful with the live connection on the output speaker connectors. Be sure to turn off the power before making any connections.
nice product
very good
works great
Autóban használom egy dc dc step up converterrel( 30V-on) illetve egy hifi előfok segítségével. A kapható autó erősítőkkel szemben ár érték arányban kimagaslóan jól teljesít.
ayaw gumana may ilaw pro wala kahit konting huming
After turned on at 24 v, the amplifier played very low and soon after it stopped working without giving a burning smell. I am disappointed with the purchase.