Banggood Dear Customer, Thank you for placing an order on Banggood and we hope you will enjoy the products you bought. If you have any further questions or suggestions, please do not hesitate to contact us via these links: Personal Computer: http://www.banggood.com/Contact-Us_hi111Mobile: https://m.banggood.com/contact_us.html Best regards, Banggood Team

Submit

Julien Today all parts were checked, four JX 1109 HB servos excellent quality 1.89 kg cm 0.09 sec /60°; ESC Skywalker 30 A 5v 2A excellent quality; XXD 2212 2450KV motor excellent quality; small material, excellent quality; propeller 5 * 5 E APC. Quality elapor nice and smooth.All servos tested with servo tester, all good, motor and controller tested also OK.I glue the rudder horns with 5 minutes epoxy glue, also the stabilizer and rudder epoxy glue, wings fit well on the fuselage, later I will write the flight characteristics.

Submit

Julien Testedall parts today, all OK and of very good quality, not because the aircraft is cheap that less quality parts were used, but really excellent parts, the Elapor is also of excellent smooth quality.

Submit

Julien TodayI flew the Skysurfer X8 for the first time, the results are fantastic.
Flies almost as well without Airelons, after take-off the plane climbs straight, I didn't have to trim ANYTHING, the wings are 100 percent the same.

The motor pushes 500 grams and is more than sufficient, I use a 3S 1800 mA Lipo,
with this Lipo I have the right center of gravity, with motor or without the plane continues to fly straight, I have not a single negative comment for this aircraft.

Ideal for any model pilot, beginner or expert, this is the best airplane I have purchased in 51 years of model flying.

I would recommend this plane to any fashion pilot.
It is very easy to build, I recommend 5 minutes of epoxy glue for all gluing.

Thank you Banggood.

Submit