SKYSTARS TA LON X110 110mm 2.5inch 3D Print Carbon Fiber RC Drone FPV Racing Frame Kit
A part of the review has been auto-translated.
Since the FC mounting hole is only 20mm × 20mm, 16mm × 16mm mounting is necessary.
Cheap!(^-^) There are plenty of accessories for the cheap Especially the TPU parts come with you to a point where you lose your motivation to produce It may be useful for those who use Toothpick or tynywhoop batteries I don't do toothpick and I don't want to use the battery of tynywhoop Besides, I don't like Sharkfin The camera hits the 16x16 tower I used a camera mount from another company as a countermeasure Results All TPU parts go to the trash can (laughs) The frame itself is not cut, not even chamfered, let alone cross-sectional treatment We only have holes for 20x20 stacks, and when we use 16x16 stacks, we only need to work The motor hole is not a 2mm hole. When using a 2mm screw, this is also necessary. But processing is simple, and if you've worked with Japanese carbon, it might be a little unmotivated Don't worry about this frame Very easy to process (^-^) It's just a moment to drill a new hole or widen the hole It is a highly recommended frame for those who like processing (^-^)
this frame looks really good. The 3D printed parts look ok, but need a bit of work with an exactoblade, around the edges. It comes with lots of different tpu battery mounting options.
Perfect Replacement Frame. Amazing Flight Characteristics
Nice quality little frame and comes with a load of different tpu parts for batteries and camera
This time it will be two aircraft. I like the frame because it has a solid frame rigidity.
very good flying frame. looks sweet pretty light. the only negative I can possibly come up with is carbon is on the thin side and there is a bit of flex, but been flying this for 2 months and has not broke any part of it so far.
ok thanks
livraison parfaite
good 👍