Just like the 5065s, but a shorter can. Just finished a dual drive longboard build with these. These are considerably noisier than the 5065s, with a slightly harsher tone (the 5065 sound just like the Evolve Carbon GT, the 5045 has a more rough whine, almost like gears). I don't mind it. If you don't like the noise, run FOC, I'm sure they would handle it fine with the hall sensors. I'm running 25A per motor through VESC on 10S, and that seems to be around their working limit. You might be able to do 30A per motor if you want, but they might not last very long. The 5065s are a bit more powerful and torquey (had them on a dual diagonal setup), but they don't fit on my dual rear setup. Plus, I don't feel I need more power, as I only feel comfortable drawing 50A from my 10S4P battery anyways. Here are some VESC settings I find work well at 10S: Motor Max/Min: 80/-80 (gives plenty of startup torque. Reduce the min value if you feel that the slow speed braking is too sensitive) Battery Max/Min: 25/-7 (don't need any more for the brakes, they're so powerful as is) Overall, you can't find a better motor at this price point. Seems to be well made, has a well sealed can, and hall sensors. Would purchase again!

Just like the 5065s, but a shorter can. Just finished a dual drive longboard build with these. These are considerably noisier than the 5065s, with a slightly harsher tone (the 5065 sound just like the Evolve Carbon GT, the 5045 has a more rough whine, almost like gears). I don't mind it. If you don't like the noise, run FOC, I'm sure they would handle it fine with the hall sensors. I'm running 25A per motor through VESC on 10S, and that seems to be around their working limit. You might be able to do 30A per motor if you want, but they might not last very long. The 5065s are a bit more powerful and torquey (had them on a dual diagonal setup), but they don't fit on my dual rear setup. Plus, I don't feel I need more power, as I only feel comfortable drawing 50A from my 10S4P battery anyways. Here are some VESC settings I find work well at 10S: Motor Max/Min: 80/-80 (gives plenty of startup torque. Reduce the min value if you feel that the slow speed braking is too sensitive) Battery Max/Min: 25/-7 (don't need any more for the brakes, they're so powerful as is) Overall, you can't find a better motor at this price point. Seems to be well made, has a well sealed can, and hall sensors. Would purchase again!

Just like the 5065s, but a shorter can. Just finished a dual drive longboard build with these. These are considerably noisier than the 5065s, with a slightly harsher tone (the 5065 sound just like the Evolve Carbon GT, the 5045 has a more rough whine, almost like gears). I don't mind it. If you don't like the noise, run FOC, I'm sure they would handle it fine with the hall sensors. I'm running 25A per motor through VESC on 10S, and that seems to be around their working limit. You might be able to do 30A per motor if you want, but they might not last very long. The 5065s are a bit more powerful and torquey (had them on a dual diagonal setup), but they don't fit on my dual rear setup. Plus, I don't feel I need more power, as I only feel comfortable drawing 50A from my 10S4P battery anyways. Here are some VESC settings I find work well at 10S: Motor Max/Min: 80/-80 (gives plenty of startup torque. Reduce the min value if you feel that the slow speed braking is too sensitive) Battery Max/Min: 25/-7 (don't need any more for the brakes, they're so powerful as is) Overall, you can't find a better motor at this price point. Seems to be well made, has a well sealed can, and hall sensors. Would purchase again!

im using this motor on a dual rear drive electric skateboard and it works great. running on 10s lipo power

im using this motor on a dual rear drive electric skateboard and it works great. running on 10s lipo power

im using this motor on a dual rear drive electric skateboard and it works great. running on 10s lipo power

Moteur reçu exactement à la date prévue [Motor has been received exactly as scheduled]. Emballage très correct: boîte en carton+sachet étanche+mousse+boîte en carton [Good packaging: cardbox box+sealed plastic bag+foam+second cardbox box]. Seul problème: le connecteur n'est pas celui prévu: Au lieu d'un connecteur MT30, on trouve 3 fiches bananes diam.4mm. C'est dommage car j'ai dû acheter séparément les connecteurs femelles MT30 correspondants, et ceux-ci vont rester sur étagère. Je vais également devoir acheter des connecteurs 4mm.... [Only problem is that instead of the expected MT30 connector, a 3 wires 4mm bullet connector has been supplied. That is a pity as I had to buy additional MT30 female connectors, which will remain on a shelf... I will also have to buy 4mm connectors now]

Moteur reçu exactement à la date prévue [Motor has been received exactly as scheduled]. Emballage très correct: boîte en carton+sachet étanche+mousse+boîte en carton [Good packaging: cardbox box+sealed plastic bag+foam+second cardbox box]. Seul problème: le connecteur n'est pas celui prévu: Au lieu d'un connecteur MT30, on trouve 3 fiches bananes diam.4mm. C'est dommage car j'ai dû acheter séparément les connecteurs femelles MT30 correspondants, et ceux-ci vont rester sur étagère. Je vais également devoir acheter des connecteurs 4mm.... [Only problem is that instead of the expected MT30 connector, a 3 wires 4mm bullet connector has been supplied. That is a pity as I had to buy additional MT30 female connectors, which will remain on a shelf... I will also have to buy 4mm connectors now]

Moteur reçu exactement à la date prévue [Motor has been received exactly as scheduled]. Emballage très correct: boîte en carton+sachet étanche+mousse+boîte en carton [Good packaging: cardbox box+sealed plastic bag+foam+second cardbox box]. Seul problème: le connecteur n'est pas celui prévu: Au lieu d'un connecteur MT30, on trouve 3 fiches bananes diam.4mm. C'est dommage car j'ai dû acheter séparément les connecteurs femelles MT30 correspondants, et ceux-ci vont rester sur étagère. Je vais également devoir acheter des connecteurs 4mm.... [Only problem is that instead of the expected MT30 connector, a 3 wires 4mm bullet connector has been supplied. That is a pity as I had to buy additional MT30 female connectors, which will remain on a shelf... I will also have to buy 4mm connectors now]

looks like the flipksy H5045 model. more happy with it then the model that was shown on the website.

looks like the flipksy H5045 model. more happy with it then the model that was shown on the website.

looks like the flipksy H5045 model. more happy with it then the model that was shown on the website.

Products are as expected, good quality and well valued. Only issue was one came with an MT30 connector and the other with bullet connectors. I was expecting both to have MT30's as that's how they are advertised.

Products are as expected, good quality and well valued. Only issue was one came with an MT30 connector and the other with bullet connectors. I was expecting both to have MT30's as that's how they are advertised.

Products are as expected, good quality and well valued. Only issue was one came with an MT30 connector and the other with bullet connectors. I was expecting both to have MT30's as that's how they are advertised.

Looks good, spins good and arrived on time. Have to test it in action yet, but it looks like a high quality durable motor. The design and size of this motor are perfect for using it for a DIY longboard/skateboard.

Looks good, spins good and arrived on time. Have to test it in action yet, but it looks like a high quality durable motor. The design and size of this motor are perfect for using it for a DIY longboard/skateboard.

Looks good, spins good and arrived on time. Have to test it in action yet, but it looks like a high quality durable motor. The design and size of this motor are perfect for using it for a DIY longboard/skateboard.

Good

Good

Good

All ok

All ok

All ok

Super

Super

Super

Great product

Great product

Great product