Perfect Case. Everything fits well and the installation was very easy! Thank Bang Good for the quick delivery.

Perfect Case. Everything fits well and the installation was very easy! Thank Bang Good for the quick delivery.

Perfect Case. Everything fits well and the installation was very easy! Thank Bang Good for the quick delivery.

Pros: 1) Fits my 1st gen Pi B+. 2) Even fits my Pi 3 B, manufacture has made the additional slot for new LED position. 3) Extremely small foot-print, wraps around the Pi in as less space as possible. 4) Came with all screws (8), stand-offs (2) and rubber feet (4) 5) Very neat matt finish Cons: 1) It is a tight-fit. One of my Pi HDML/Audio plug was soldered at factory off by half an mm, I could not get to fit it in the case. Maybe the box could have been made 1-2 mm bigger. 2) Not really a con as the manufacturer does not claim it will fit Pi 3, but Pi 3 does not have a push-push SD card slot, so you would need a tweezer to pull the SD card out. 3) This is a serious con. The solders beneath my Pi and Pi 3 are so close to the metal case, that there is a big danger of shorting. I put electrical insulation tapes at bottom corners and now I am good, but for a general consumer not so good. 4) The back of the case has holes to hold it up with screws. The Pi board is very close to the holes, so again if metal screws may touch the board underside and short. I stuck electrical tape under the Pi board where it is exposed to screws. Perhaps the manufacturer can provide the tapes too and update his manual. Overall, the cons were easily solvable by me. I love the product, so does my 10-yo son (bought 3). I would recommend this product.

Pros: 1) Fits my 1st gen Pi B+. 2) Even fits my Pi 3 B, manufacture has made the additional slot for new LED position. 3) Extremely small foot-print, wraps around the Pi in as less space as possible. 4) Came with all screws (8), stand-offs (2) and rubber feet (4) 5) Very neat matt finish Cons: 1) It is a tight-fit. One of my Pi HDML/Audio plug was soldered at factory off by half an mm, I could not get to fit it in the case. Maybe the box could have been made 1-2 mm bigger. 2) Not really a con as the manufacturer does not claim it will fit Pi 3, but Pi 3 does not have a push-push SD card slot, so you would need a tweezer to pull the SD card out. 3) This is a serious con. The solders beneath my Pi and Pi 3 are so close to the metal case, that there is a big danger of shorting. I put electrical insulation tapes at bottom corners and now I am good, but for a general consumer not so good. 4) The back of the case has holes to hold it up with screws. The Pi board is very close to the holes, so again if metal screws may touch the board underside and short. I stuck electrical tape under the Pi board where it is exposed to screws. Perhaps the manufacturer can provide the tapes too and update his manual. Overall, the cons were easily solvable by me. I love the product, so does my 10-yo son (bought 3). I would recommend this product.

Pros: 1) Fits my 1st gen Pi B+. 2) Even fits my Pi 3 B, manufacture has made the additional slot for new LED position. 3) Extremely small foot-print, wraps around the Pi in as less space as possible. 4) Came with all screws (8), stand-offs (2) and rubber feet (4) 5) Very neat matt finish Cons: 1) It is a tight-fit. One of my Pi HDML/Audio plug was soldered at factory off by half an mm, I could not get to fit it in the case. Maybe the box could have been made 1-2 mm bigger. 2) Not really a con as the manufacturer does not claim it will fit Pi 3, but Pi 3 does not have a push-push SD card slot, so you would need a tweezer to pull the SD card out. 3) This is a serious con. The solders beneath my Pi and Pi 3 are so close to the metal case, that there is a big danger of shorting. I put electrical insulation tapes at bottom corners and now I am good, but for a general consumer not so good. 4) The back of the case has holes to hold it up with screws. The Pi board is very close to the holes, so again if metal screws may touch the board underside and short. I stuck electrical tape under the Pi board where it is exposed to screws. Perhaps the manufacturer can provide the tapes too and update his manual. Overall, the cons were easily solvable by me. I love the product, so does my 10-yo son (bought 3). I would recommend this product.

Great build quality, built like a tank. Perfectly fits my RPI 2. I had to unscrew the front plate where the ethernet port is, then slide in the RPI 2 and tightly screw everything back. Like a tank, I said.

Great build quality, built like a tank. Perfectly fits my RPI 2. I had to unscrew the front plate where the ethernet port is, then slide in the RPI 2 and tightly screw everything back. Like a tank, I said.

Great build quality, built like a tank. Perfectly fits my RPI 2. I had to unscrew the front plate where the ethernet port is, then slide in the RPI 2 and tightly screw everything back. Like a tank, I said.

URGENT shipment requested for pilot run

URGENT shipment requested for pilot run

URGENT shipment requested for pilot run

Very good case, it helps to keep the machine cool

Very good case, it helps to keep the machine cool

Very good case, it helps to keep the machine cool

The case is as expected, fits the Pi perfectly.

The case is as expected, fits the Pi perfectly.

The case is as expected, fits the Pi perfectly.

A very well crafted piece of work and fits the Rpi 2 like a glove. Easy to install and everything comes with it (like little rubber nobs with adhesive and screws). It is full aluminium so be carefull not to fasten the screws back too tight since the threading is soft!! The price is unbeatable and the case has a little lit wich can slide of so you are able to acces the GPIO pins. In all very content with it!

A very well crafted piece of work and fits the Rpi 2 like a glove. Easy to install and everything comes with it (like little rubber nobs with adhesive and screws). It is full aluminium so be carefull not to fasten the screws back too tight since the threading is soft!! The price is unbeatable and the case has a little lit wich can slide of so you are able to acces the GPIO pins. In all very content with it!

A very well crafted piece of work and fits the Rpi 2 like a glove. Easy to install and everything comes with it (like little rubber nobs with adhesive and screws). It is full aluminium so be carefull not to fasten the screws back too tight since the threading is soft!! The price is unbeatable and the case has a little lit wich can slide of so you are able to acces the GPIO pins. In all very content with it!

The case is of good quality and well designed, there is a hole for leds so they are visible. MIcro sd card sits deeps enough so that it does not come out by accident, but is still easy to remove if needed.

The case is of good quality and well designed, there is a hole for leds so they are visible. MIcro sd card sits deeps enough so that it does not come out by accident, but is still easy to remove if needed.

The case is of good quality and well designed, there is a hole for leds so they are visible. MIcro sd card sits deeps enough so that it does not come out by accident, but is still easy to remove if needed.

It's fitting perfectly the Pi2. All ports are available, The heat is well evacuated through the metal body. Good product for the price. I would recommend it to friends. I just did not find in the package the small anti slipping stickers.

It's fitting perfectly the Pi2. All ports are available, The heat is well evacuated through the metal body. Good product for the price. I would recommend it to friends. I just did not find in the package the small anti slipping stickers.

It's fitting perfectly the Pi2. All ports are available, The heat is well evacuated through the metal body. Good product for the price. I would recommend it to friends. I just did not find in the package the small anti slipping stickers.

The aluminum casing is well built. Cuts are clean, holes are well machined. My RPi2 fits perfectly inside it. Initially worried that the case will short out the circuit at the bottom, but was surprised that it was designed pretty well.

The aluminum casing is well built. Cuts are clean, holes are well machined. My RPi2 fits perfectly inside it. Initially worried that the case will short out the circuit at the bottom, but was surprised that it was designed pretty well.

The aluminum casing is well built. Cuts are clean, holes are well machined. My RPi2 fits perfectly inside it. Initially worried that the case will short out the circuit at the bottom, but was surprised that it was designed pretty well.