Customer Reviews

4.94 out of 5
See all 2794 reviews
Write a Review
  • All Reviews (2794)
  • Image (333)
  • Video (6)
  • All Star
    • All Star(2794)
    • 5 Star(2691)
    • 4 Star(59)
    • 3 Star(22)
    • 2 Star(10)
    • 1 Star(12)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (India)
|
Show Original

A part of the review has been auto-translated.

  • 01/10/2015

    I picked up this board and when it arrived it certainly was minuscule. An excellent addition for your FPV. Unfortunately, just as several other buyers had mentioned the incorrect firmware was on the minim and the display was showing "Arducam 2.0 - Waiting for mavlink heartbeats" I spent quite a bit of time looking at the other options and going through You Tube videos particularly the ones from Painless360 (very informative thanks). This link was also useful: http://blog.oscarliang.net/minimosd-micro-setup-naze32-pid-rssi/ I have made a couple of other Arduino projects in the past and thought it would not be that difficult to flash the firmware. Unfortunately when I attempted to flash the firmware with the KV Team mod 2.3 It would not work. I kept on getting sync issues. It turns out you need to connect the DTR, RX, TX, 5V and GND to get it to flash, I was only using RX,TX and power connections. Board settings in Arduino was Arduino Pro and Arduino Pro Mini 5V ATmega328P. I then got errors with compiling version 2.3 of the mod. The error was "error: variable 'item_table' must be const in orde..." I found a fix in this link: https://github.com/duststorm/rush-osd-development/issues/21 and there is also a link to the fixed version of 2.3 here: https://github.com/slacker87/rush-osd-development/archive/master.zip So at the end of the day I got it working, but it would have been nice for it to have been delivered with the correct firmware in the first place Then again I did learn something! I hope others find the links useful.

    Comments
    Show Original
  • 12/09/2015

    This won't work out of the box. You'll need an FTDI adapter, like this one: http://www.banggood.com/FT232RL-FTDI-USB-To-TTL-Serial-Converter-Adapter-Module-For-Arduino-p-917226.html?p=430714520645201404S1 You'll need the Arduino SDK to upload custom Firmware; also the "scarab OSD 1.5". I would say simply watch a youtube tutorial, this is quite useful.

    Comments (1)
    Show Original
  • 05/09/2015

    I use this in order with CC3D and OpenPilot Firmware. Very easy to setup! You just need to solder the interface, battery and RSSI pins, flash the module with the appropriate firmware and connect it to the main port. Configuring is done via the minimosd configuration tool. Take a look here if you plan to do the same: https://code.google.com/p/minoposd/

    Comments (1)
    Show Original
  • 25/03/2017

    Ставлю на все свои квадрики,отлично прошивается и настраивается.Возможность менять пиды и другие настройки полётника с пульта.Убранная в термоусадку почти не занимает места.Очень удобно.

    Comments
    Show Original
  • 25/04/2018

    Quick and good quality. MICRO Minim Osd Minim Osd Mini OSD W/ KV Team MOD

    Comments
    Show Original
  • 27/10/2015

    This won't work out of the box. You'll need an FTDI adapter, like this one: http://www.banggood.com/FT232RL-FTDI-USB-To-TTL-Serial-Converter-Adapter-Module-For-Arduino-p-917226.html?p=430714520645201404S1 You'll need the Arduino SDK to upload custom Firmware; also the "scarab OSD 1.5". I would say simply watch a youtube tutorial, this is quite useful: https://www.youtube.com/watch?v=zjl9T4D0UHs

    Comments
    Show Original
  • 19/02/2017

    Nutze das OSD am Eachine Wizard x220 mit MWOSD Firmware installiert. Funktioniert super außerdem hat es ein OSD Menü womit man an den goggles alle Einstellungen ändern kann die vom OSD und auch Betaflight PID's. Was will man mehr nie wieder Laptop anschließen um Kleinigkeiten zu probieren. Das OSD Menü lässt sich aufrufen durch Yaw ganz rechts und pitch ganz nach oben halten dann sieht man das Menü in der Brille navigon mit den sticks. Die Firmware muss erst installiert werden das OSD kommt leer was aber normal ist. Am Anfang gab es immer mal leichte OSD Aussetzer und bildprobleme bei starken schnellen Stick Bewegungen. Nach kurzer Suche im Internet habe ich einen Elko Kondensator von(mindestens 370mycro Farad 10V) direkt an die Lötpins des OSD für die Versorgungsspannung von 5v 500mah parallel mit angeschlossen (Plus Minus beachten sonst geht der Elko defekt). Damit Funktioniert das OSD prächtig ständig stabiles Bild keine Aussetzer. Der Kondensator fängt spannungsspitzen bei starken stromstößen ab und alles geht super. Die Kondensatoren braucht man nicht unbedingt kaufen findet man in fast jedem alten Elektro Gerät ich habe einen 1000 my F 16V aus einem alten Auto Radio genommen in dem Radio sind bestimmt gut 20 Elkos gewesen die man auslöten kann.

    Comments
    Show Original
  • 16/01/2017

    If your OSD won't flash don't connect OSD GND to your FTDI adapter CTS. Just connect the OSD GND (directly besides 5V) to the GND on the outside of your FTDI adapter. Leave OSD's other GND and FTDI's CTS asside.

    Comments
    Show Original
  • 21/11/2016

    Nice and small OSD for FPV racers. Working well with naze32. Iam using MWOSD firmware. You will need FTDI USB To TTL Serial Converter for programming OSD

    Comments (1)
    Show Original
  • 07/04/2017

    Works perfectly, must have for any FPV pilot. Must be flashed using ftdi adapter, all info available on Youtube.

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • ₹831.81
    • ₹582.02
    • ₹1,581.19
    • ₹582.02
    • ₹1,248.13
    • ₹665.28
    • ₹831.81
    • ₹1,747.71
    • ₹415.49
    • ₹665.28
    • ₹1,747.71
    • ₹831.81
    • ₹3,621.99
    • ₹665.28
    • ₹582.02
    • ₹582.02
    • ₹3,163.21
    • ₹1,248.13