Customer Reviews

4.93 out of 5
See all 135 reviews
Write a Review
  • All Reviews (135)
  • Image (6)
  • Video (0)
  • All Star
    • All Star(135)
    • 5 Star(126)
    • 4 Star(9)
    • 3 Star(0)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (India)
|
Show Original

A part of the review has been auto-translated.

  • 01/08/2018

    I was able to get this working very quickly, but the values coming from the HX711, with no load on the bar, kept drifting very significantly. After a long troubleshooting session, I found out that the HX711 print has a major design flaw. They forgot to connect the AGND pin of the HX711 to GND, so it's just floating in the air, explaining the drifting. This can be fixed by soldering a wire between the GND pin on one connector and the E- pin on the other side. I found the exact same board on a different site with a picture of the schematics. This confirms that AGND is not connected to GND. See attached picture. It's also important to note that the print is designed to be supplied with 5V, even though the HX711 is specified to work down to 2.6V. The internal voltage regulator on the HX711 is configured with R12 and R13 to produce 4.2V across the sensor (E+ and E-). Considering the drop across the transistor, the supply voltage needs to be about 4.5V (or up to 5.5V), otherwise the regulator can't do its job. If a 3.3V supply is provided, the resistors can be changed accordingly. If you use it as is on 3.3V, be aware that the built-in regulator will not be able to do its job, so any ripple on the supply voltage will influence the measurement.

    Comments (3)
    Show Original
  • uhmVIP3
    DK
    28/02/2019

    Tested on a Professional instrument, and accuracy is within +- 5%, acceptable for this price.

    Comments
    Show Original
  • 04/11/2017

    It is okay and very sensitive. it may need fine tune when putting in use. There are so many things may affect its reading.

    Comments
    Show Original
  • 19/10/2017

    Nifty little 20kg load cell for measuring weight / thrust.

    Comments
    Show Original
  • 30/01/2021

    Received in good order and the courier was quick. The parcel was also well packed, thanks, but still need to test

    Comments
    Show Original
  • 30/08/2020

    Package arrived as described

    Comments
    Show Original
  • 16/11/2019

    excelente para proyectos

    Comments
    Show Original
  • 20/10/2017

    Nice product.

    Comments
    Show Original
  • 27/10/2022

    ras

    Comments
    Show Original
  • 19/05/2022

    Received In good condition. It looks big on the picture but the actual thing is too small.

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • ₹641.53
    • ₹749.98
    • ₹862.61
    • ₹2,084.77
    • ₹332.86
    • ₹333.70
    • ₹583.14
    • ₹1,667.65
    • ₹916.83
    • ₹504.72
    • ₹332.86
    • ₹791.70
    • ₹776.68
    • ₹1,036.96
    • ₹558.11
    • ₹1,152.09
    • ₹666.56
    • ₹941.86