Fine, excellent!

Fine, excellent!

Fine, excellent!

Everything's working perfectly. The flight controller and controls are already installed and the apparatus is flying.

Все отлично работает. Полетный контроллер и регуляторы уже установлены и аппарат летает.

Everything's working perfectly. The flight controller and controls are already installed and the apparatus is flying.

I burnt one when connected the battery opposite side. Bought a new one

I burnt one when connected the battery opposite side. Bought a new one

I burnt one when connected the battery opposite side. Bought a new one

the esc that i recieve has overheat issue. thank fully blheli allow me to turn off overheat protection

the esc that i recieve has overheat issue. thank fully blheli allow me to turn off overheat protection

the esc that i recieve has overheat issue. thank fully blheli allow me to turn off overheat protection

Recommend!

Recomendo!

Recommend!

it come with the very small solder pad. take me 70p to solder it. and the GND pad can’t use to solder. I have to solder GND wire to the GND battery pad

it come with the very small solder pad. take me 70p to solder it. and the GND pad can’t use to solder. I have to solder GND wire to the GND battery pad

it come with the very small solder pad. take me 70p to solder it. and the GND pad can’t use to solder. I have to solder GND wire to the GND battery pad

Good, good, good, good.

ดีๆๆๆๆๆๆ

Good, good, good, good.

good items

good items

good items

Ottimo ESC 4 in 1 per droni da 80/100mm, sostituito all'originale del Mantis85 che si era bruciato. Un po' dfficoltoso il montaggio perchè non è provvisto del classico connettore ma tutti i fili verso il FC vanno saldati al PCB.

Ottimo ESC 4 in 1 per droni da 80/100mm, sostituito all'originale del Mantis85 che si era bruciato. Un po' dfficoltoso il montaggio perchè non è provvisto del classico connettore ma tutti i fili verso il FC vanno saldati al PCB.

Ottimo ESC 4 in 1 per droni da 80/100mm, sostituito all'originale del Mantis85 che si era bruciato. Un po' dfficoltoso il montaggio perchè non è provvisto del classico connettore ma tutti i fili verso il FC vanno saldati al PCB.

The ESC is good and very light but have two problems: 1) Low Voltage Cutt-off and 2) Very small signal pins.

The ESC is good and very light but have two problems: 1) Low Voltage Cutt-off and 2) Very small signal pins.

The ESC is good and very light but have two problems: 1) Low Voltage Cutt-off and 2) Very small signal pins.