I've built several FPV micro drones but when I saw the Eachine E010C become available I had to try one. It comes with the Eachine E010 drone, the 800tvl 25MW camera, and the parts you need to hook them together. It isn't really a new model of E010 but more of a kit of the parts you need. Do you have to do some soldering the but wire was just the right length and the double stick tape was the perfect size. After putting it together it was lighter than the Whoopie or custom unit I had put together previously. Because of this it definitely flew better. This is certainly not a custom 250 racer, but for playing around the house it's cheap and perfect. The only thing you don't get in the box is the FVP goggles or display. I have a couple of recommendations below if you are just getting started and don't already have a set. Is summary, this thing is WAY better than I expected it to be, primarily because they made it as light as possible.

I've built several FPV micro drones but when I saw the Eachine E010C become available I had to try one. It comes with the Eachine E010 drone, the 800tvl 25MW camera, and the parts you need to hook them together. It isn't really a new model of E010 but more of a kit of the parts you need. Do you have to do some soldering the but wire was just the right length and the double stick tape was the perfect size. After putting it together it was lighter than the Whoopie or custom unit I had put together previously. Because of this it definitely flew better. This is certainly not a custom 250 racer, but for playing around the house it's cheap and perfect. The only thing you don't get in the box is the FVP goggles or display. I have a couple of recommendations below if you are just getting started and don't already have a set. Is summary, this thing is WAY better than I expected it to be, primarily because they made it as light as possible.

I've built several FPV micro drones but when I saw the Eachine E010C become available I had to try one. It comes with the Eachine E010 drone, the 800tvl 25MW camera, and the parts you need to hook them together. It isn't really a new model of E010 but more of a kit of the parts you need. Do you have to do some soldering the but wire was just the right length and the double stick tape was the perfect size. After putting it together it was lighter than the Whoopie or custom unit I had put together previously. Because of this it definitely flew better. This is certainly not a custom 250 racer, but for playing around the house it's cheap and perfect. The only thing you don't get in the box is the FVP goggles or display. I have a couple of recommendations below if you are just getting started and don't already have a set. Is summary, this thing is WAY better than I expected it to be, primarily because they made it as light as possible.

I was one of the few folks who received this through the Free Trial promotion from Banggood in exchange for an unbiased review. I have to say, I love this little quadcopter. I've made a couple of tiny whoops on my and I also own tiny whoop contenders like the x73 and other sub 90mm frame fvp quads, but I have to say that for what you get with this package, it's probably the best bang for the buck out of all of them. Everything comes in a neat little package, no soldering required, which is so refreshing since the little pads on these are often a huge pain in the butt to work with. The box is the same as the E010 so from the outside you might think it's not the E010C version, but once you open it you'll see everything is included to make your whoop, plug and play. The E010 is one of the most stable fliers I've flown, and recovers amazingly from crashes and bumps. I flew it with the stock controller for the sake of the review and even then it performed well. Best part is that it can be flown with your Taranis if you have the 4 in 1 multiprotocol module. Overall, I think this is probably the one to get if you want to get started with FPV and are hesitant to bite the bullet on something more expensive or that requires a full-function transmitter. Pair this with a cheap monitor and/or some cheap goggles and you're set for some awesome indoor flying!

I was one of the few folks who received this through the Free Trial promotion from Banggood in exchange for an unbiased review. I have to say, I love this little quadcopter. I've made a couple of tiny whoops on my and I also own tiny whoop contenders like the x73 and other sub 90mm frame fvp quads, but I have to say that for what you get with this package, it's probably the best bang for the buck out of all of them. Everything comes in a neat little package, no soldering required, which is so refreshing since the little pads on these are often a huge pain in the butt to work with. The box is the same as the E010 so from the outside you might think it's not the E010C version, but once you open it you'll see everything is included to make your whoop, plug and play. The E010 is one of the most stable fliers I've flown, and recovers amazingly from crashes and bumps. I flew it with the stock controller for the sake of the review and even then it performed well. Best part is that it can be flown with your Taranis if you have the 4 in 1 multiprotocol module. Overall, I think this is probably the one to get if you want to get started with FPV and are hesitant to bite the bullet on something more expensive or that requires a full-function transmitter. Pair this with a cheap monitor and/or some cheap goggles and you're set for some awesome indoor flying!

I was one of the few folks who received this through the Free Trial promotion from Banggood in exchange for an unbiased review. I have to say, I love this little quadcopter. I've made a couple of tiny whoops on my and I also own tiny whoop contenders like the x73 and other sub 90mm frame fvp quads, but I have to say that for what you get with this package, it's probably the best bang for the buck out of all of them. Everything comes in a neat little package, no soldering required, which is so refreshing since the little pads on these are often a huge pain in the butt to work with. The box is the same as the E010 so from the outside you might think it's not the E010C version, but once you open it you'll see everything is included to make your whoop, plug and play. The E010 is one of the most stable fliers I've flown, and recovers amazingly from crashes and bumps. I flew it with the stock controller for the sake of the review and even then it performed well. Best part is that it can be flown with your Taranis if you have the 4 in 1 multiprotocol module. Overall, I think this is probably the one to get if you want to get started with FPV and are hesitant to bite the bullet on something more expensive or that requires a full-function transmitter. Pair this with a cheap monitor and/or some cheap goggles and you're set for some awesome indoor flying!