DIY Self-assembled RC Robot Tank Car Chassis With Crawler Kit Aluminium Alloy
A part of the review has been auto-translated.
La verdad al desempacarlo me di cuenta que las piezas de aluminio (base y soportes de oruga) venian doblados pero nada que afectara mucho su funcionamiento pero tuve que cambiar de lado todos los muelles de las poleas porque quedaban descentrados con la polea superior fue un trabajo tedioso pero creo que funcionara la verdad no recomiendo mucho el producto los motores pequeños no tienen tanta fuerza
East to put together. Recommend putting some blue LocTite or other thread locking substance on every screw, especially the ones on the side that cannot and should not be fully tightened. The motor wiring is as follows: RED: Motor Power supply + BLACK: Coding power supply - YELLOW: Signal feed back GREEN: Signal feed back I assume you get a better resolution if you use both Yellow and green BLUE: Coding power supply + WHITE: Motor power supply - I was a little disappointed that it goes so slow. The description says that motors run at 100 rpm but mine only runs about 35 rpm. It goes less than 3 inches per second.
Apesar da boa relação custo x beneficio seria interessante que além dos parafusos reserva também fossem incluídos no pacote alguns trechos da esteira. Recomendo fortemente a compra de um par para trocas futuras sendo que aqui mesmo no site é possível encontra-las por um ótimo preço.
good quality
1Banggood is trusted 2Cheaper than laser cut 3Ready to assemble and use 4The wheel does not have bearings 5The motor is not same as the picture 6The suspensions not working well 7Cheaper shipin cost
sloppy engineering, suspension is poor requiring more nuts to set up correctly, also nut lock is required else the suspension arms will fall off . No bearings used anywhere.
Everything there