I bought these for my FrSky D4R-II receivers. The tubes are quite short, they could do with another 3cm length. I just let the aerial wires hang out the top though. The adhesive pad is pretty strong, I used it in conjunction with tie-wraps though; there are holes back and front to put tie-wraps right through. I'd definitely buy more of these despite the short tubes. They're very compact and I prefer them to the usual 3D printed versions.

I bought these for my FrSky D4R-II receivers. The tubes are quite short, they could do with another 3cm length. I just let the aerial wires hang out the top though. The adhesive pad is pretty strong, I used it in conjunction with tie-wraps though; there are holes back and front to put tie-wraps right through. I'd definitely buy more of these despite the short tubes. They're very compact and I prefer them to the usual 3D printed versions.

I bought these for my FrSky D4R-II receivers. The tubes are quite short, they could do with another 3cm length. I just let the aerial wires hang out the top though. The adhesive pad is pretty strong, I used it in conjunction with tie-wraps though; there are holes back and front to put tie-wraps right through. I'd definitely buy more of these despite the short tubes. They're very compact and I prefer them to the usual 3D printed versions.

Good antenna straws didn't Nedd the holder as I font have that frame yet for a cheap price you can get two antenna straws that fit perfectly in my 3d printed holder on my fpv Drone as they are standard size. haven't flown with them yet I'm sure they will protect the rx antennas perfectly well.

Good antenna straws didn't Nedd the holder as I font have that frame yet for a cheap price you can get two antenna straws that fit perfectly in my 3d printed holder on my fpv Drone as they are standard size. haven't flown with them yet I'm sure they will protect the rx antennas perfectly well.

Good antenna straws didn't Nedd the holder as I font have that frame yet for a cheap price you can get two antenna straws that fit perfectly in my 3d printed holder on my fpv Drone as they are standard size. haven't flown with them yet I'm sure they will protect the rx antennas perfectly well.

it's quality is not so good because the tubes are not fitted into the plastic box and the screw wholes has no thread so that the screws can't get into whole and it's very hard to tight, otherwise it's very light weight and small also it looks good.

it's quality is not so good because the tubes are not fitted into the plastic box and the screw wholes has no thread so that the screws can't get into whole and it's very hard to tight, otherwise it's very light weight and small also it looks good.

it's quality is not so good because the tubes are not fitted into the plastic box and the screw wholes has no thread so that the screws can't get into whole and it's very hard to tight, otherwise it's very light weight and small also it looks good.

nice antenna mount

nice antenna mount

nice antenna mount

Super für Receiver mit 2 Antennen um die V Form der Antennen perfekt auszurichten. Kann man auch gut auf Flugzeuge wie Wings montieren.

Super für Receiver mit 2 Antennen um die V Form der Antennen perfekt auszurichten. Kann man auch gut auf Flugzeuge wie Wings montieren.

Super für Receiver mit 2 Antennen um die V Form der Antennen perfekt auszurichten. Kann man auch gut auf Flugzeuge wie Wings montieren.

Working fine. It do what it is supo used to do but the tip of the tubbes are too loose

Working fine. It do what it is supo used to do but the tip of the tubbes are too loose

Working fine. It do what it is supo used to do but the tip of the tubbes are too loose

Buon piede per antenne Rc evitando che la vostra antenna incappi tra le eliche del vostro quad. Consigliato l'utilizzo. Poco peso e spesa irrisoria.

Buon piede per antenne Rc evitando che la vostra antenna incappi tra le eliche del vostro quad. Consigliato l'utilizzo. Poco peso e spesa irrisoria.

Buon piede per antenne Rc evitando che la vostra antenna incappi tra le eliche del vostro quad. Consigliato l'utilizzo. Poco peso e spesa irrisoria.

Доставка 23 дня Упаковано отлично. Все пришло без повреждений! Неплохой вариант установки антенн приемника, собирается легко, есть один запасной винтик. Можно установить на липучку из комплекта, но лучше на стяжку. Недорого, качественно.

Доставка 23 дня Упаковано отлично. Все пришло без повреждений! Неплохой вариант установки антенн приемника, собирается легко, есть один запасной винтик. Можно установить на липучку из комплекта, но лучше на стяжку. Недорого, качественно.

Доставка 23 дня Упаковано отлично. Все пришло без повреждений! Неплохой вариант установки антенн приемника, собирается легко, есть один запасной винтик. Можно установить на липучку из комплекта, но лучше на стяжку. Недорого, качественно.

Soft plastic, one spare screw, not very long tube antenna (at photos with R7008SB). It is a good thing, but I would like holes for mounting to the frame

Soft plastic, one spare screw, not very long tube antenna (at photos with R7008SB). It is a good thing, but I would like holes for mounting to the frame

Soft plastic, one spare screw, not very long tube antenna (at photos with R7008SB). It is a good thing, but I would like holes for mounting to the frame

Ideal para colocar las antenas del cuadicóptero (o tri, hexa...), las eleva o las baja en línea recta sin que puedan tocarse accidentalmente con las hélices u otro componente, además las separa en un ángulo perfecto de 90º, con lo que se optimizará la señal.

Ideal para colocar las antenas del cuadicóptero (o tri, hexa...), las eleva o las baja en línea recta sin que puedan tocarse accidentalmente con las hélices u otro componente, además las separa en un ángulo perfecto de 90º, con lo que se optimizará la señal.

Ideal para colocar las antenas del cuadicóptero (o tri, hexa...), las eleva o las baja en línea recta sin que puedan tocarse accidentalmente con las hélices u otro componente, además las separa en un ángulo perfecto de 90º, con lo que se optimizará la señal.