I use this LED Strip for my drones build. Solder directly to flight controller (5V and programmable). Very good stuff! One of my build with this LED strip: https://youtu.be/M5KeG9W4e6A

I use this LED Strip for my drones build. Solder directly to flight controller (5V and programmable). Very good stuff! One of my build with this LED strip: https://youtu.be/M5KeG9W4e6A

I use this LED Strip for my drones build. Solder directly to flight controller (5V and programmable). Very good stuff! One of my build with this LED strip: https://youtu.be/M5KeG9W4e6A

Nice Led Strip. Works as expected with Adafruit Neopixel Arduino Library. Each 144 pixel is individually addressable thanks to WS2812B individual chips. You will see how to wire it on the picture below. Some small trouble however: All R leds set to 255 All G leds set to 255 All B leds set to 255 Brighness missing or set to 255. (Same effect). So, at full power, my intensity is only 2.30 A. Should be 8.16 A, as given by Banggood specification (43 W) ? Where is the issue ? And 2 of the 144 pixels fails at full power. They don't show the right color. That the reason why I put only 3 stars for quality. The 100 cm strip is composed of 2 x 50 cm soldered together elements. Due to the solder, there is a gap measuring the double of the normal distance, between these 2 elements. The 1st led of the right element is slightly moved upstairs. That the reason why I put only 4 stars for appearance. CNCEVER

Nice Led Strip. Works as expected with Adafruit Neopixel Arduino Library. Each 144 pixel is individually addressable thanks to WS2812B individual chips. You will see how to wire it on the picture below. Some small trouble however: All R leds set to 255 All G leds set to 255 All B leds set to 255 Brighness missing or set to 255. (Same effect). So, at full power, my intensity is only 2.30 A. Should be 8.16 A, as given by Banggood specification (43 W) ? Where is the issue ? And 2 of the 144 pixels fails at full power. They don't show the right color. That the reason why I put only 3 stars for quality. The 100 cm strip is composed of 2 x 50 cm soldered together elements. Due to the solder, there is a gap measuring the double of the normal distance, between these 2 elements. The 1st led of the right element is slightly moved upstairs. That the reason why I put only 4 stars for appearance. CNCEVER

Nice Led Strip. Works as expected with Adafruit Neopixel Arduino Library. Each 144 pixel is individually addressable thanks to WS2812B individual chips. You will see how to wire it on the picture below. Some small trouble however: All R leds set to 255 All G leds set to 255 All B leds set to 255 Brighness missing or set to 255. (Same effect). So, at full power, my intensity is only 2.30 A. Should be 8.16 A, as given by Banggood specification (43 W) ? Where is the issue ? And 2 of the 144 pixels fails at full power. They don't show the right color. That the reason why I put only 3 stars for quality. The 100 cm strip is composed of 2 x 50 cm soldered together elements. Due to the solder, there is a gap measuring the double of the normal distance, between these 2 elements. The 1st led of the right element is slightly moved upstairs. That the reason why I put only 4 stars for appearance. CNCEVER

The strip was short and very tight between the lamps but thats good for I will cut them to use them on my quadcopters as led light.

The strip was short and very tight between the lamps but thats good for I will cut them to use them on my quadcopters as led light.

The strip was short and very tight between the lamps but thats good for I will cut them to use them on my quadcopters as led light.

good

good

good

These are so closely spaced, they look beautiful. Worked fine with Adafruit Neopixel library... But for Arduino I like FastLED library better, has lower CPU and memory footprint. Works great. So pretty.

These are so closely spaced, they look beautiful. Worked fine with Adafruit Neopixel library... But for Arduino I like FastLED library better, has lower CPU and memory footprint. Works great. So pretty.

These are so closely spaced, they look beautiful. Worked fine with Adafruit Neopixel library... But for Arduino I like FastLED library better, has lower CPU and memory footprint. Works great. So pretty.

Well packaged and excellent delivery time (12 calendar days from order). I have been playing with ws2812 "neo-pixels" for a while now. These are great fun and I am happy to recommend them.

Well packaged and excellent delivery time (12 calendar days from order). I have been playing with ws2812 "neo-pixels" for a while now. These are great fun and I am happy to recommend them.

Well packaged and excellent delivery time (12 calendar days from order). I have been playing with ws2812 "neo-pixels" for a while now. These are great fun and I am happy to recommend them.

It's okay. Use them as stripes for the drone, they're extremely tight. This is a bit difficult for soldering, boar works great.

Alles ok. Benutze sie als Streifen für die Drohne, sind extrem eng angeordnet. Dies ist etwas schwierig beim Löten, Eber funktioniert super.

It's okay. Use them as stripes for the drone, they're extremely tight. This is a bit difficult for soldering, boar works great.

Good LED strip. Is waterproof. Works as described and expected.

Good LED strip. Is waterproof. Works as described and expected.

Good LED strip. Is waterproof. Works as described and expected.

Love these LED's, have used them for years. Easy to use with Arduino, many libraries and examples. Starting a WiFi project with these strips and will review additional information later.

Love these LED's, have used them for years. Easy to use with Arduino, many libraries and examples. Starting a WiFi project with these strips and will review additional information later.

Love these LED's, have used them for years. Easy to use with Arduino, many libraries and examples. Starting a WiFi project with these strips and will review additional information later.

Very nice strip works good

Very nice strip works good

Very nice strip works good