Customer Reviews

4.67 out of 5
See all 12 reviews
Write a Review
  • All Reviews (12)
  • Image (2)
  • Video (0)
  • All Star
    • All Star(12)
    • 5 Star(11)
    • 4 Star(0)
    • 3 Star(0)
    • 2 Star(0)
    • 1 Star(1)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (India)
|
Show Original

A part of the review has been auto-translated.

  • 15/12/2021

    Well packaged, received in good condition and excellent delivery time (12 calendar days from order). The ESP32CAM is one of my favorite micro-controllers. I find it useful to have a SD card reader built in, but it does mean there's a shortage of GPIO pins. The other main issue is that you normally need to program it with a FTDI chip. The MB option gets round this neatly - just plug the EDP32cam into the motherboard and you can program it over the USB port. Ransom nerd have a good description of this board and associated tutorials. I am happy to recommend this MCU.

    Comments
    Show Original
  • 09/12/2021

    The product works fine with the originally uploaded code, but when I upload my own code I got an error message 0x20002 which means that camera pin setting is wrong. I tried many setups without success. WHAT IS THE PINOUT for the pins used by the camerajQuery111303389024727909917_1639075977269?

    Comments
    Show Original
  • 29/08/2023

    Nice and useful board

    Comments
    Show Original
  • 10/08/2023

    He's here

    Comments
    Show Original
  • 04/11/2022

    It's okay

    Comments
    Show Original
  • 21/10/2022

    At the first view I was disappointet because the IO0 button for programming is missing. But when testing the ESP32-CAM with the Ardiono IDE the programm can be loaded without any problem in the configuration I received. The CAM is a cheap one and cannot be focused. But you can buy a more expensive one that can be focused and the pictures and videos will be of a much better quality. The delivery was very fast - as usual for BANGGOOD.. I can recommend the product.

    Comments
    Show Original
  • 10/07/2022

    Még nem használtam, mert még minden feltétel adódott meg az elképzeléseimhez. Gyorsan hiánytalanul megérkezett.

    Comments
    Show Original
  • 28/06/2022

    Delivered very quickly. Both ESP32-CAMs run with the installed software as AP. The modules go into download mode when plugged in, press reset, then run. The Arduino-Sketch Example/ESP32/Camera/CameraWebServer runs with the following settings: Board: ESP32 Wrover Module Partition Scheme: Huge APP (3MB....) in the sketch: #define CAMERA_MODEL_AI_THINKER, ssid and password, then the ESP32CAM runs on its own network. Tested with Arduino-IDE 1.8.19 and Espressif-esp32 2.0.3

    Comments
    Show Original
  • 26/05/2022

    very good, you can use the metal sd card slot as heatsink for the camera, the antenna is ok, but is a bit difficult to replace the 0 ohm resistor for the antenna switching

    Comments
    Show Original
  • 12/03/2022

    All is ok ! Fast shipping and delivery

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • ₹1,081.60
    • ₹665.28
    • ₹4,602.84
    • ₹332.22
    • ₹2,144.05
    • ₹582.02
    • ₹582.02
    • ₹582.02
    • ₹831.81
    • ₹1,178.19
    • ₹665.28
    • ₹2,247.30
    • ₹1,997.51
    • ₹831.81
    • ₹3,596.18
    • ₹2,663.62
    • ₹2,484.60
    • ₹3,246.47